sales@jmhsteel.com
sales@jmhsteel.com
Product
Continuous Form: Aluminum coils and strips are long, continuous sheets wound into rolls, enabling high-speed, cost-effective mass production for industries like packaging, automotive, and construction.
Thickness Variety: They are available in a wide gauge range, from thin foils for food wrapping to thicker strips for building facades and heat exchangers, offering flexibility for diverse manufacturing needs.
Ease of Processing: The coils can be easily slit, cut, stamped, or roll-formed into finished parts. They also support various coatings and laminations, providing enhanced corrosion protection and decorative finishes for long-term outdoor use.
Online consultation
Project Introduction
| Comprehensive Technical Specification Table for Aluminum Coil/Strip | ||
| Alloy Series Overview | ||
| Alloy Series | Key Alloying Elements | Applications |
| 1000 Series (1050, 1060, 1070, 1100) | ≥99.0–99.7% Al | Chemical/electrical equipment, railroad tank cars, decorative applications |
| 3000 Series (3003, 3004, 3105) | Mn (1.0–1.5%) | General fabrication, construction, automotive |
| 5000 Series (5052, 5083, 5754) | Mg (0.5–5.5%) | Marine environments, automotive, structural |
| 6000 Series (6061) | Mg & Si | Structural, aerospace, industrial applications |
| 8000 Series (8011, 8021) | Various | Packaging, pharmaceutical, food service |
| Dimensional Specifications | ||
| General Size Ranges | ||
| Parameter | Range / Specification | Notes |
| Thickness | 0.1 mm – 6.0 mm (common) | Up to 100 mm for plate products; precision tolerances available |
| Width | 6 mm – 3,300 mm (max) | Standard range: 20–1600 mm |
| Coil Inner Diameter (ID) | 76 mm, 152 mm, 508 mm, 610 mm | Standard sizes; custom per request |
| Coil Weight | 100 kg – 6 tons (typical) | Large coils up to 34 tons |
| Length (Cut-to-Length Sheets) | 1 m – 10 m | Custom lengths available |
| Applicable Standards & Scope | ||
| Standard | Title / Scope | |
| ASTM B209/B209M | Standard Specification for Aluminum and Aluminum-Alloy Flat Sheet, Coiled Sheet, and Plate | |
| ANSI H35.2-2024 | American National Standard Dimensional Tolerances for Aluminum Mill Products | |
| EN 485-3 | Aluminum and Aluminum Alloys - Sheet, Strip and Plate - Tolerances on Shape and Dimensions for Hot-Rolled Products | |
| GB/T 3190-2008 | Chemical Composition of Aluminum and Aluminum Alloys | |
| GB/T 3880-2006 | Mechanical Properties of Aluminum and Aluminum Alloy Sheets and Strips | |
| Processing & Application Guide | ||
| Parameter | Details | |
| Production Methods | Hot Rolling, Cold Rolling, Casting and Rolling | |
| Processing Services | Slitting, Decoiling, Bending, Welding, Shearing, Punching | |
| Processing Tolerances | ±0.5% for general dimensions; precision tolerances per EN 485-3 | |
| Edge Types | Slit edge, mill edge, trimmed edge | |
| Compliance | RoHS, SGS, FDA, ISO, REACH (specified grades) | |
| Certification | MTC (Mill Test Certificate), EN 10204 3.1, Certificate of Origin, Bureau Veritas, SGS | |
Related PRODUCT
